Whilst chlorine is an important chemical used to keep your swimming pool clean and safe for soaking, it is important to know that you’ve got a safe amount of chlorine. Having too much chlorine in your pool can be dangerous by causing eye and skin irritation, as well as breathing problems. Furthermore, having too much chlorine water can cause your swimwear to fade.
It is therefore important to recognise when there is too much chlorine in your swimming pool and how to counteract it to ensure that the water hygiene levels are back to normal. If you own a commercial swimming pool, it is in your best interests that your visitors are safe at all times, therefore it is imperative that the chlorine levels are normal.
Here are just some ways to help with the amount of chlorine in your swimming pool.
Leave the Cover Off
If you own an outside pool and believe that there’s too much chlorine, then leaving the cover off of the pool will allow the chlorine to be processed. The ultraviolet light from the sun will also help to break down the chlorine over time by burning it out of the water. It is important to also not let anyone enter the pool until the water quality is back to a safe level. This approach is effective as it doesn’t cost anything and doesn’t require any chemicals.
One way of mitigating the presence of chlorine and improving the water quality is by using chemicals. Chemicals like hydrogen peroxide will break down chlorine however, it is important to consider that adding this will lower your pool’s ph. One possible solution to this is enlisting the help of professional chlorination services. At H2O Comply, we strive for the best when it comes to being one of the leading experts in water hygiene, specialising in optimal water tank chlorination and disinfection services. By using our help, we can provide you with the best advice when it comes to water hygiene.
Replace the Water
If the chlorine needs to be reduced then adding fresh water could be an option. Draining the pool and adding fresh water means that the pool is being diluted. It is important to consider that other chemicals are also being drained here, so it is recommended to test your pool afterwards. Again, if you are only adding a little bit of water then this technique is both inexpensive and chemical-free.
If you are looking for a team of specialist water treatment engineers that are committed and dedicated, then H2O Comply are just the team for you. Whether it be water tank cleaning and disinfection or chlorination treatments, we have got you covered. If you are convinced that H2O Comply are the right company for you, get in touch with our team today!